#3 CATIA 101 Apply stickers to a plane.

#CATIA 101 Part Design

A basic tutorial regarding catia part design intended to be use as describe below.

Program: 5th Product Design and Development 2014 (5th PDDW 2014)
Students : KISMEC, Kedah, Malaysia.
Date: 2/6/2014, 1400 hrs - 1600 hrs

#2 CATIA 101 Basic To set the measurement parameter

Assalamualaikum and Good Day everyone,

This tutorial is about how to change the units and parameters such as the length, weight into desired parameter such as inch or mm with CATIA V5. Do learn this and it might safe your time on how to change the parameters as we need in our drawing.

#1 CATIA 101 Basic (Settings) : To turn the workbenches tools to standard view

Assalamualaikum,

Good Day everyone,



Have you ever wonder, why your classmates, your workmates getting more and more in use with catia software and you are now still searching on how to get use to the software? And still searching in the internet on which is the best shortcut to pass the catia test, or to complete any task given?



The secret is here. In this post, i have made a tutorial that is done by others soon after they start their catia software early in the morning. That is on 'How To Turn The Workbenches Tools to Standards View'. This is a simple step that usually most of us skipped (as it is in the first chapter of any catia tutorial) . But it is truly important as we will get in used of this time by time with its standard view.



The concept is, if we are used with the standard view, that we can make work faster by searching icons that are eyes are used for such as in Sketcher Workbench, Sketch Icon is at the Top Right Corner of the Screen, as we have remembered time by time we used the software. Eventually, if someone have used our workstation or worse it is publicily shared workstation, most of us will have those tools scattered as we want to find tools icon that are usually hiding in the worjbenches. This scattered icon will not be in standard position again otherwise we make it to be in standard position again. Thus, it will be hard for us to find the icons. And it will slow down our work as we are trying to get used on the new positioned that are last used by our friend.



So, what to wait? Watch this video tutorial, (its only 2 minutes and 10 seconds), and learn how to make the tools in standard position. This will reduce the time of 'time to get used to a new icons position', and faster your work progress time by time.



Enjoy.



wassalam.

#prayformh370

#8 Sukhoi 29 BuildingVertical Tail & Rudder HD

This video tutorial is about using CATIA V5 workbench that is mostly wireframe and surface design to do reverse engineering project on theVertical Tail and the Rudder. Quit a lot of changing views from top, front and side to have the design equal to the plan. For those who have completed the wings and fuselage sections, this is the easier part.

#7 Sukhoi 29 Building Horizontal Stabilizer & Elevator HD

This video tutorial is about using CATIA V5 workbench that is mostly wireframe and surface design to do reverse engineering project on the Horizontal Stabilzer and Elevator. Quit a lot of changing views from top, front and side to have the design equal to the plan. For those who have completed the wings and fuselage sections, this is the easier part.

#6 Sukhoi 29 Building Main Wing & Aileron HD

Assalamualaikum and Good Day,



This video is about the steps on reverse engineering of the Main Wing and the Aileron of the Sukhoi 29 in Wireframe and Surface Design. The workbench uses Wireframe and Surface Design most.

#5 Sukhoi 29 Building Main Wing HD

Continue on building the fuselage of the su 29 and also start the main wing design process

#4 Sukhoi 29 Building Fuselage 2 HD

#3 Sukhoi 29 Building Fuselage HD

#2 Sukhoi 29 Placing cross section on planes HD

Assalamualaikum

As promised this is the second video on sukhoi 29 tutorial. We started with the fuselage sections from the front to the aft. Placing the pictures of the 3 view plan along the fuselage. Learn how to crop pictures from Microsoft Picture Manager and what type of file that can be associated with CATIA V5. And also this video shows on how to change the parameters in STICKERS. have you learn about stickers yet? If not, feel free to watch the video.

Thanks



Wassalam

#1 Sukhoi 29 Placing pictures on planes HD

Assalamualaikum,



Today i want to show to you how i ve done the SUKHOI 29. This is the first video for 2014. InsyaALLAH, will upload everyday for the next video tutorial. Make sure you follow our blog so that you wont miss the video tutorial.



Or you can watch from our youtube channel.



Thanks all.

Sukhoi 27 Flanker 3 Plan view Reverse Engineering

CATIA V5 R19. 2 days work on Reverse Engineering, design on wireframe and surface construction specialization.

I ve downloaded su 27 k diagram below. as usual, we need 3 view of the diagram that is side, front and top or bottom view.

Then, those three view picture is cut out using picture editor such as microsoft photo manager. This software is the best to do simple cut to the picture.

Then, 3 surfaces are created that is on the centre of the axis (0,0,0). Remind that you need to have the length, height and wing span of the aircraft so that you will have the correct size of the aircraft.


Then, using photo studio workbench, use add sticker, (icon with sticking paper), below CATIA screen, and select picture that you need as above. Please be remind that this picture can only be viewed with SHOW MATERIAL shading, below CATIA window.


Above is the side view of the airplane. In this method, ive use 3D curve to sketch the nose, wind screen @ cockpit, fuselage through the engine. Then, ive created points along the 3d curve.

3D spline are used to create the cross section of the fuselage from nose to the engine. Loft method have been used to loft the fuselage from nose until the engine. Before that, take note that i only made the surface of the left side of the airplane. my idea is, to apply symmetry to the create the surface.

This is the front view of the airplane. You can see that the airplane have been made symmetrical and you can see the continuation of the tangency on the connections.

As you can see, the tail have it different angle on the tip of the horizontal tail. Ive made angled plane, and airfoil sketch is created before the loft method is used to create the tail.


Below is the pictures of the finished airplane without any stickers on the airplane. Below is only the surfaces that ive changed the standard yellow colour of the airplane.


Here i show you, the wireframe of the airplane once we selected the wireframe shading. As you can see, the wireframe is used by CATIA to create the surfaces that we developed.


Below is finished su 27k. I am very very satisfied what i ve done in this project. Ive put sticker (same as above method) to the airplane. I also locate Russian Star logo on the wing and the vertical tail. Ive also put stickers on the engine.

Here ive finished my project doing a reverse engineering on Su 27k. This is an interesting project that i ve ever finished before on wireframe and surface design PLUS reverse engineering method.

check my b747 tutorial here and Dassault Rafale from france here. Using the same method as done in this post. happy learning !
any catia job need to be finished? click here

zihad
CATIA V5 Specialist
Malaysia